For Designers & Landscape Architects

Specify irrigation control built to keep running for years.

You design landscapes that have to survive budget cycles, staff turnover, and tightening water restrictions. Calsense gives you the drawings, specs, and support to make sure what you draw is what gets installed, and what gets installed keeps working long after the punch list is closed.

Why designers specify Calsense

Your design intent, protected after handoff.

The irrigation controller is usually the last thing on the plan set and the first thing blamed when a landscape struggles. Here is what changes when Calsense is the specified system.

1

Water budgets you can defend

WeatherSense delivers real-time evapotranspiration and rain data to every controller in the field, so schedules adjust to actual conditions instead of a setting someone typed in during construction.

2

Flow sensing that catches failures

Real-time flow monitoring and leak detection identify mainline breaks and stuck valves, then shut down the affected zone. Your plant material and your client’s budget both survive the break.

3

Durability that shows up in the field

Stainless-steel enclosures, modular electronics, and a 10-year warranty. Calsense controllers stay in service for years, which is a fair testament to how they are built and a low total cost of ownership for your client.

Effortless specification

Calsense is built into Land F/X.

Calsense is integrated directly into the Land F/X manufacturer catalog, so you can place and specify our equipment inside the CAD environment you already work in. No re-keying part numbers, no chasing cut sheets mid-deadline.

  • Place Calsense controllers and equipment straight from the Land F/X catalog
  • Automatic pressure and flow calculations with the Irrigation F/X add-on
  • Draw pipe, size mainlines, and generate schedules without leaving your drawing
  • Catalog data stays current, so your spec reflects what we actually build
Talk to an Expert
Documentation

Everything you need to put us in the plan set.

Specification language, submittal-ready data, and the technical detail your civil and electrical coordination will ask for.

📐

CS3000 Designer’s Guide

Enclosure dimensions, station counts, mounting and clearance requirements, power and grounding, and 2-wire layout guidance. Start here.

📄

Standard Product Specifications

Specification language you can drop into your Division 32 section without rewriting it.

🛡️

Warranty

Our limited warranty terms, in writing, for your submittal package and your client’s records.

🧰

Service & Support

What your client gets after installation: training, field service, and a support team that answers.

🗂️

Cut Sheets & CAD Drawings

Product data sheets, installation details, and drawing files for controllers, enclosures, and sensors.

💧

Water Efficiency & Compliance Resources

Reporting and scheduling capabilities that help projects meet local water-use requirements and ordinances.

Need something that isn’t listed here?

Additional documentation, product cut sheets, CAD drawings, and more.

Browse the Resource Library
After the spec

We stay on the project after you move on to the next one.

Specifying a system is a recommendation with your reputation attached. Here is what your client gets once the controller is on the wall.

Training for the people who inherit it

On-site and remote training for the crews and managers who take over the system, so it gets used the way you intended it to be used.

Local, factory-direct field service

Regionally based Calsense representatives handle startup, diagnosis, and troubleshooting. Not a call center, not a third party.

A design partner, not just a vendor

Bring us in early. We will review station counts, flow strategy, and communication options with you before the drawings go out for bid.

“It’s the best system out there, and I highly recommend Calsense. Calsense does it right and for the long term.”
Markus Hogue
Irrigation and Water Conservation, University of Texas at Austin
Get in touch

Working on a design right now?

Tell us about the project and we will help you size the system, choose the right communication option, and get the specification language you need. No sales pitch, just answers.